![]() Attach screw knobs located on each side.If you exceed this amount, the fill level sensor will stop suction and the warning display will flash. The collection tank can hold ½ gallon of water. It should slide smoothly and fit tightly+ Use the latches to lock tank in place.To re-install the tank, pull out the latches and slide tank onto the back of the Blue Evolution.Secure the lid to the tank before re-installing. ![]() Remove the lid and fill the tank with water to the GREEN fill line.Remove by pulling latches out, located on the sides of the tank, and slide off.Any alteration of electrical cord supply on this steam cleaner will void all warranties Assembly Collection Tank.Use only a 12 gauge / 15 AMP rated or higher rated extension cord with max length of 25ft.The steam cleaner should be the only appliance plugged into an outlet.ALWAYS test a small area before cleaning a large area on any type of surface to make sure no damage will occur.Keep body, hands, and feet away from accessories or nozzle when steam is in active use.Not setting safety switch to locked position could result in an injury.ALWAYS set safety switch on hose handle into the locked position when not in use.DO NOT handle the electrical plug with wet hands.NEVER attempt to disassemble this steamer.If the steam cleaner is not working as it should, has been dropped, damaged, left outdoors or dropped into water, call for service before using.Turn off all controls and unplug the electrical cord when not in use.DO NOT leave the steam cleaner unattended while plugged in.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |